MeteoHelix®, ezMETAR & new MeteoWind® Compact will be showcased at Meteorological Technology World Expo 2018 on October 9-11

MeteoWind® Compact ANALOG OUTPUT anemometer with a wind vane

MeteoWind® Compact ANALOG OUTPUT anemometer with a wind vane

BARANI DESIGN Technologies will showcase their latest product innovations which will include the MeteoHelix® IoT Pro micro-weather stations, ezMETAR airport and heliport weather station & the new MeteoWind® Compact anemometer with a wind vane and analog output. 

Free visitor badges are available directly on the Meteorological Technology World Expo website at the following link: http://www.meteorologicaltechnologyworldexpo.com/en/

MeteoWind® Compact

The MeteoWind® Compact will feature a reed switch wind speed sensor with two pulses per revolution and analog 0...2.5 V wind direction sensor without a dead band and better than 2 ° accuracy. With an average power consumption reaching down to only 20 µA in addition to lightning protected outputs, it is designed for wireless solar and battery powered applications in precision agriculture and meteorology alongside MeteoHelix® IoT Pro weather stations.

MeteoHelix® IoT Pro

MeteoHelix® IoT Pro micro-weather stations will be displayed along with allMETEO® weather map and cloud portal. allMETEO® is designed not to replace but to complement customers' existing analytical software. Its main function is for weather station management, meteorological data management and live weather view of these affordable research-grade accuracy all-in-one solar powered wireless weather stations. A few lucky visitors at the Expo will be able to take home a MeteoHelix® IoT Pro Sigfox version as well.

ezMETAR

ezMETAR, the affordable AUTO-METAR featuring ICAO approved sensors will also be displayed at the Expo, allowing visitors to see first hand its high quality sensor and data logger suite along with strong lightning protection and intelligent solar power management system.  

BARANI DESIGN Technologies will be located in stand number 10005 near Vaisala and IBL Software Engineering.

 

What is the difference between METAR and AUTO-METAR?

ezMETAR weather station with a MeteoShield® in the forefront above a small private airport

ezMETAR weather station with a MeteoShield® in the forefront above a small private airport

What does the word "AUTO" in a METAR message indicate?

  • The presence of "AUTO" in a METAR report message indicates a fully automated report with no human intervention.

  • Absence of AUTO indicates that the report is either a manual report or an automated report with an observer logged on to the system.
    (The report modifier group which contains the AUTO or COR modifiers does not appear in all reports.)

What does the word "COR" in a METAR message indicate?

  • Presence of "COR" in a METAR means that a corrected METAR or SPECI is being transmitted. "COR" report invalidates a previous message and replaces it with a "COR" message.

Can "AUTO" and "COR" be in a METAR message simultaneously?

  • "AUTO" and "COR" cannot be transmitted in the same METAR. Logic indicates that if the term "COR" is used, the observation cannot be "AUTO", because someone (observer) is correcting it.

  • Any automatic "AUTO" report generating system has no way of knowing that the previous message needs to be corrected since it was generated by the rules programmed into the system.

  • If an observer is not monitoring METAR observations from a weather station, than by default, the METAR report messages sent from the weather station must contain the modifier word "AUTO".

  • "AUTO" informs the pilot that the system is not being monitored by a human observer and the associated risks.

When is SPECI report generated and what is it?

  • SPECI is issued and transmitted when a significant change in weather conditions occurs (deterioration or improvement). Significant change in winds and gusts, visibility, cloud base height or occurrence of severe weather. It can be issued by an AUTO METAR generating system based on ICAO & WMO guidelines.

Paraphrased from: Aeronautical Information Manual Study Guide For The Private Pilot: 2013

For more information about the MeteoHelix®, ezMETAR airport weather stations and AUTO-METAR weather monitoring system please visit BARANI DESIGN website: www.baranidesign.com or visit us in person at Farnborough Airshow 2018 in hall 3, booth 3418. 


Basic AUTO-METAR example:

  • LZPH12345 112000Z AUTO 00000KT //// // ////// 26/16 Q1007

METARlogGSM sends a METAR report in the following format to any specified FTP server & port: 
METAR LZPH12345 112000Z AUTO 29006KT //// // ////// 26/16 Q1007=

Complex AUTO-METAR example:

  • EGLL 081420Z AUTO 29006KT 260V340 9999 VCTS SCT038/// //////CB 25/15 Q1023 TEMPO 4000 +TSRA


BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS

MeteoHelix® micro-weather stations for airstrips

MeteoHelix® micro-weather stations for airstrips

Wireless weather monitoring solution for small airports and heliports is set to be priced below 500 Eur, making it the most economical WMO compliant wireless weather station on the market for use on even the most cost conscientious airstrips.

Read More